Sunix RS-232/422/485 Manuel d'utilisateur télécharger pdf (Page 8)

SUNIX NCCI Co., Ltd.

TEL : +886-2-8913-1987

Regulatory Approvals CE, FCC

2. Hardware Installation

This chapter includes information about hardware installation for RS-232 Universal PCI Multi-Port Communication Board.

The following topics are covered:

 Hardware Installation

 Pin Assignments

2-1. Hardware Installation

The hardware installation of PCI / PCI-E serial boards is easy to carry out. Before inserting the card into the PCI / PCI-E bus,

please follow the detailed steps given below to install the PCI / PCI-E serial board in your computer.

Safety First

To avoid damaging your system and boards, make sure your PC’s power is turned off

before installing PCI/PCI-E card.

Step 1: Turn your PC’s power off, and shut off the power to any peripheral.

Step 2: Remove the power plug from the plug socket.

Step 3: Remove the cover from the computer case.

Step 4: If fitted. Remove the metal cover plate on the rear of a free PCI slot.

Step 5: Insert Universal PCI / PCI-E Multi-Port Communication Board into the free PCI / PCI-E slot and screw it firmly on

the bracket side.

Step 6: Place the cover back onto the computer.

Step 7: Insert the plug into the plug socket.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 59 60

Pas de commentaire

Sunix RS-232/422/485 Manuel d'utilisateur Page 8